Assessment Validation Unpacked: Guide to Validating Assessments
Assessment Validation Unpacked: Guide to Validating Assessments
Blog Article
RTOs must handle various tasks post-registration, such as annual declarations, AVETMISS reporting, and marketing compliance, but validation usually presents the biggest challenge.
Though we've written extensively on validation, let's clarify it again. ASQA describes it as a quality assessment review.
Validation is essentially about verifying the accuracy of parts of an RTO's assessment process and spotting areas needing improvement. Understanding its key components can make it less daunting.
As stated in Clause 1.8 of the SRTOs 2015, RTOs must ensure their assessment systems, including RPL, comply with the training package requirements and adhere to the Principles of Assessment and Rules of Evidence.
The standards require RTOs to perform two types of validation.
The first type of validation ensures that your RTO's assessment meets the requirements of the training package within your scope.
The next type of validation confirms assessments are carried out following the principles of assessment and rules of evidence.
This suggests we perform validation both before and after the assessment. This article will concentrate on the first type—assessment tool validation.
The Basics of the Two Types of Assessment Validation
Exploring the Concept of Assessment Validation
As mentioned earlier and in one of our previous blog posts, validation is split into two stages: (1) assessment tool validation and (2) post-assessment validation.
Pre-assessment validation, or assessment tool validation, is concerned with the first part of the clause, which ensures all unit requirements are met and that workbooks are fully compliant.
Post-assessment validation, in contrast, is about the implementation, requiring Registered Training Organisations to conduct assessments adhering to the Principles of Assessment and Rules of Evidence.
Our focus here will be on assessment tool validation.
Methods for Conducting Assessment Tool Validation
Understanding the two types of validation allows us to delve into the specifics of assessment tool validation.
When Assessment Tool Validation Should Be Done
Assessment tool validation seeks to ensure all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.
This means that whenever new learning resources are acquired, assessment tool validation must be performed before they are used by students.
There's no requirement to wait for your next 5-year cycle validation schedule. Validate new resources promptly to ensure they’re ready for students.
Yet, this is not the only occasion to conduct this type of validation. Perform assessment tool validation when you:
- update your resources
- new training products are added on scope
- course is reviewed against training product updates
- you identify your learning resources as a risk during your risk assessment
The Australian Skills Quality Authority's risk-based regulatory approach means RTOs should conduct regular risk assessments. Complaints from students about learning resources are a prime opportunity for assessment tool validation.
Which Training Products Should You Validate?
Do not forget, this validation ensures compliance of all learning resources before they are used. All RTOs must validate resources for each unit.
Key Resources for Assessment Tool Validation
Teaching Materials
For validation of your assessment tools, you will require the full set of your learning resources:
Mapping tool – start by investigating this document. It shows which assessment items meet unit requirements, facilitating quicker validation.
Learner/student workbook – check its suitability for use as an assessment tool. Verify clear instructions and sufficient answer fields. This is often a gap.
Assessor guide/marking guide – verify that instructions for assessors are comprehensive and clear benchmarks for each assessment item are present. Clear benchmarks are key to reliable assessment outcomes.
Other related resources – could include checklists, registers, and templates developed apart from the workbook and marking guide. Validate them to confirm they fit the assessment task and meet unit requirements.
Validation Group
Clause 1.11 sets out the requirements for validation panel members, stating that validation can be conducted by one or more individuals. RTOs generally require all trainers and assessors to be involved, sometimes including industry experts.
As a group, your validation panel must possess:
Vocational competencies and industry skills relevant to the unit being validated
Recent knowledge and expertise in vocational teaching and learning
Any one of these training and assessment credentials:
TAE40116 Certificate IV in Training and Assessment or its equivalent
Validation form/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
A validation tool aids in both the validation process and documentation. It helps visualize how each assessment item meets each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Additionally, it can provide proof that you have validated your resources before students use them.
While ASQA does not recommend or require a specific template for assessment tool validation, numerous templates are available online. These tools generally require validators to examine the tools as a whole to see if they meet the principles of assessment.
Principles of Assessment Form Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
While these templates simplify the validation process, they can introduce judgment errors because there is insufficient space for comments on each assessment item.
A more detailed template is recommended to thoroughly inspect each unit requirement and the assessment items that align with them. Below is an example:
Element Performance Criteria Assessment Instructions Standards Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Needs Inspection?
As we covered in our blog post Common Problems In Assessment Tools, your assessment tools must ensure trainers adhere to assessment principles and evidence rules.
Assessment Principles
Fairness – Are equal opportunities and access ensured in the assessment process?
Flexibility – Does the assessment offer various options to demonstrate competence based on different needs and preferences?
Validity – Is the assessment evaluating what it is intended to evaluate? Is it a valid tool for assessing the required skill or knowledge?
Reliability – Will the assessment yield consistent results each time, regardless of the trainer? Will different assessors make the same decision on skill competence?
Core Rules of Evidence
Validity – Is the evidence demonstrating that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence sufficient to ensure the learner has the required skills and knowledge?
Authenticity – Is the assessment tool proving that the work is the candidate’s own?
Currency – Do the assessment tools mirror current units of competency and modern industry practices?
Even though these are regularly addressed in VET professional development and nationally recognised training, numerous tools fail to meet these requirements.
To avoid using learning resources that leave certain unit requirements unaddressed, ensure you adhere to these guidelines:
Live Up to Your Words
Take note of the verbs used in the unit requirements and make sure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:
Carry out each of the following at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication as per here service and regulatory requirements:
changing nappies
bottle preparation, feeding infants from bottles, and cleaning equipment
prepare solid food and feed infants
respond properly to infant signs and cues
prepare and settle babies for sleep
monitor and support age-appropriate physical exploration and gross motor skills
Having students explain changing nappies for babies under 12 months old doesn’t directly address the unit requirement. Unless it’s meant to assess underpinning knowledge (i.e., knowledge evidence), students should be carrying out the tasks.
Heed the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Pay attention to the numbers. In our CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby isn’t sufficient.
Full Compliance or Not Competent
Pay attention to lists. As illustrated above, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Clarify Further
Each assessment item should have clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Hence, it’s important that your instructions do not confuse students or assessors. For instance:
What kind of information can be included in a work package?
What sort of information can be included in a work package?
Answers might include:
Necessary materials
Related costs
Length of activities
Designated duties and responsibilities
If an assessment item requires multiple answers, specify the number of answers a student must provide. This ensures your assessment is reliable, and the evidence collected is valid.
This is also true for assessment items with double-barrelled questions or those that require multiple answers at once. These can confuse students and assessors, as demonstrated in the sample question below:
Name a hazard and/or environmental issue in the workplace and choose the most effective hazard control hierarchy.
Possible answers can include, but are not limited to:
Weather conditions – work area isolation, engineering controls, PPE
Work area and ground conditions – eliminating hazards, isolating, engineering controls
People – isolating, engineering controls, administration
Structural hazards – substituting, isolation, engineering
Chemical hazards – isolation, engineering, administrative controls
Equipment or machinery – isolation, engineering controls, administrative controls
Avoiding double-barrelled questions simplifies responses for students and allows assessors to judge competence accurately.
Considering these requirements, you might wonder, “Don’t learning resource developers have audit guarantees?” But these guarantees mean you have to wait for an audit to rectify noncompliance. This impacts your compliance history, so it’s wiser to take a safe and compliant approach.